SINGLE-BENDING METAL TUBE BENDER WITH MANDREL

*Adopting solenoid valve and integrated circuit to control every motion separately. That extends the life of the parts of hydraulicsystem.
*Three-step circuit is with the functions of cooling & sedimentation to keep hydraulic oil from deterioraion.
*Main shaft is heat-treated specially and the bending arm is made of special forged steel. All the parts are made under very strict quality control so that the quality of machine is good & the specification is standardized.
*The machines is with emergency stop device.
*Both manual and automatic operation are available.
*Various angles can be set. You can bend one pipe with several bending on one machine only to save the time of re-loading & unloading among different machines.
*The control panel has clear description for every button / gauge, so non-technician still can operate our machine correctly.
*Can be equipped with an automatic feeding device. This device has the function of pipe-length setting up. *Besides, our machine (NC type) can make 10-angle bending with the Japanese-made micro encoder at the same time. Due to these 2 factors, our machine can produce many kinds of sophisticated/complicated bending-pipe as clients' wish and the clients spend much less labor cost than using other brand machines.
*With our NC type machines, client can bend the pipes as their own wishes if they make right adjustments on 3 points:
( 1 ) The stroke of automatic feeding device.
( 2 ) The angle of bending.
( 3 ) The number of feeding.