ROTATING TABLE SHOT BLASTING M/C

This m/c is against the large work piece which is not suitable to hang for handling or large but thin ribs work piece those are deposited on the rotating table at low speed, meanwhile, the work piece. surface will be shoted steel ball by shot wheelabrators in hi-speed and continuously, after then, the casting sand, scaling& burring etc, which adhesived on the work piece surface will be cleaned in short time, the processed work piece will be shined & burnished and convenient for next step rocesings.

This m/c can be installed special fixtures tohandle long profile work iece as fig shown, Especially, which can be employed for spring to shot peening use.

Model:CH-105-1
Max. load capacity:800kg
Max. load height:700mm
Working table dia.:1,300mm
No, of wheelabrator:2
Shoting power:7-1/2HPx2
Working table driving power:1HP
Elevating shot power:1HP
Dust collecting power:2HP
Used floor space(LXW):3m2
N.W.:2,000kg

Model:CH-105-2
Max. load capacity:1,000kg
Max. load height:700mm
Working table dia.:1,500mm
No, of wheelabrator:2
Shoting power:7-1/2HPx2
Working table driving power:1HP
Elevating shot power:1HP
Dust collecting power:2HP
Used floor space(LXW):3m2
N.W.:2,500kg

Model:CH-105-3
Max. load capacity:1,200kg
Max. load height:900mm
Working table dia.:1,700mm
No, of wheelabrator:3
Shoting power:7-1/2HPx2
Working table driving power:2HP
Elevating shot power:1HP
Dust collecting power:2HP
Used floor space(LXW):4m2
N.W.:3,000kg
We reserve the right to modify the designs & specifications. so that,those are subjected to change, without prior notice.
Machine made available on request.